Linkage Kit Drawing Downloads
For your convenience, all of the information shown on the linkage pages has been included on the linkage drawings below. Each of the drawings is available for download in PDF or DXF format.
Pipe Linkage Kit Drawing Download
Drawing number 18-9001-01 |
|
|
Hex Linkage Kit Drawing Download
Drawing number 18-9000-01 |
|
|
Rod End Details and Dimension Chart
Rod ends with bearings are used to provide long term reliability, virtually eliminate binding and wear, and provide tight control of the driven load. These rod ends allow for some lateral misalignment between the drive shaft and driven load which simplifies installation.
Drive Model Number |
Rod End Thread Size |
C |
D
Hole Size |
X
Angle of
Misalignment |
W
Across
Flats |
Group 31 |
5/16"-24 |
0.437" |
0.312" |
14° |
0.437" |
11-150
11-200 |
1/2"-20 |
0.625" |
0.500" |
12° |
0.750" |
11-300 |
5/8"-18 |
0.750" |
0.625" |
16° |
0.875" |
11-400 |
3/4"-16 |
0.875" |
0.750" |
14° |
1.000" |
11-430
22-300
22-400
22-800 |
1-1/2"-12 |
1.312" |
1.500" |
6.5° |
2.000" |
|
